Episode 8: Building the Dumas 41′ USCG Utility Boat in 3/8″ = 1 foot scale

Episode 8: Adding the side deck

Unless you plan to motorize the boat, I would recommend skipping step 17 where the center deck is cut away from the hull. It will be easier to fill any gaps between the center and side decks if the center deck is not removed.

Episode 1: The Building Board
Episode 2: Building up the keel
Episode 3: Adding the formers and sheers
Episode 4: Adding the chines
Episode 5: Adding the bottom planks
Episode 6: Removing the hull from the building board
Episode 7: Adding the center deck
Episode 8: Adding the side decks
Episode 9 Adding the side planks
Episode 10: Trimming the side planks
Episode 11: Adding the rear deck
Episode 12: Filling and sanding the hull
Episode 13: Adding the cabin formers
Episode 14: Adding the fore cabin sides and tops
Episode 15: A workaround to a mistake made in Episode 13